Webshop » Action & Lifestyle Cameras » Accessories Drift & + » Mounting Accessoires » Pedco Magnetic UltraMount

Pedco Magnetic UltraMount

Pedco Magnetic UltraMount Pedco Magnetic UltraMount

Pedco Magnetic UltraMount Pedco Magnetic UltraMount



€ 38.00 € 33.00

Available - Limited stock

Magnetic UltraMount™

The Magnetic UltraMount™ is a portable magnetic mount that supports small cameras, camcorders, optic scopes, and other devices with a 1/4-20 thread. The ball mount has a simple, one-adjustment knob for quick and accurate multi-directional control so that the camera can be positioned at almost any angle. With a magnetic straight pull of 50 lbs. devices are securely attached to magnetic surfaces such as railings, cars, cabinets, etc. This product is not recommended for use with SLRs or other heavy devices.


Versatile

Universal mount fits any camera, camcorder, remote flash or binoculars with a 1/4°-20 thread

Secure

Supports lightweight cameras, camcorders and other divices.

Not recommended for use with SLRs or other heavy devices.

Simple

One adjustment knob allows for quick and accurate multi directional control.

Magnetic

Magnetic straight pull off 50 lbs


Product Specs

Dimensions: 2 3/8" x 2 3/8" x 3 5/8" (6cm x 6cm x 9cm)

Weight: 5.9 oz. (168 g)


CAUTION: Always test the magnetic surface with the Magnetic UltraMount™ prior to attaching a camera or other digital device to make sure it is securely attached, as the pull strength of the magnet may vary depending on the surface it is attached to. Be cautious when removing the Magnetic UltraMount™ as the magnetic surface may scratch, remove or damage painted surfaces or other finishes. The Magnetic UltraMount™ is not suitable for SLR cameras or cameras using telephoto lenses. The Magnetic UltraMount™ should be used in accordance with all product instructions and warnings. Do not spray the product with WD-40 or other aerosol products, as these contain solvents that can damage or weaken the product or its magnetic surface. Please note that ceramic magnets like the Magnetic UltraMount™ are brittle and may break if dropped or mishandled. In ordinary usage in accordance with the manufacturer?s instructions and warnings, this magnet should not damage your computer tablet or smartphone. However, do not place the product near magnetically sensitive objects such as credit cards, pacemakers, defibrillators, computer hard drives or other magnetic storage media, and certain electronic devices. Industrial Revolution assumes no liability for personal injury or property damage resulting from use of the product near objects sensitive to magnets. Magnetic objects like the Magnetic UltraMount™ can pose a serious pinch hazard due to the attractive force between the product and the object to which it is being attached, so use caution in handling the product.


HOW TO USE THE MAGNETIC ULTRAMOUNT™

1. Attach the Magnetic UltraMount™ base to a magnetically compatible metallic surface.

Pull strength varies by surface so test carefully before application with device. Mount any lightweight device with a 1/4°-20 mounting socket to the mounting screw. Not recommended for use with SLRs or other heavy devices.

2. Mount camera, or other device, by loosening the Adjustment Knob slightly, and turning the Ball & Screw Mount to screw the Mounting Screw into the base of the camera.

3. Set the camera to the approximate desired angle with one of the Index Notches engaged then tighten the Adjustment Knob until the Ball just moves in between the Clamps.

4. Adjust the camera to the exact position and tighten the Adjustment Knob down firmly.


Made in USA